Parweld XTP 40 Plasma Cutter 110v / 220v
€1,016.26 inc. VAT
Out of stock
Cutters
The Parweld XTP 40 plasma cutter it ideal for cutting metals up to 12mm thick where the output power can be fine tuned to minimise dross on the cut edges. The pilot arc automatically re-ignites enabling easy cutting of mesh or perforated materials. Non HF ignition minimises the risk of interference with electronic systems. Generator Friendly The XTP 40 is able to cope with inputs which fluctuate by +/-15% & can be used with the majority of generators. The machine is housed in a metal case with carry handle & shoulder strap. At only 12.6kg and able to operate from either 110v or 220v and from generators with a minimum of 6.0kva make this unit ideal for site work.
Specifications
Parweld XTP 40 Plasma | Technical Data |
Mains Voltage | 110 V – 230 V |
Production Cut Capacity | 12mm |
Severance Cut Capacity | 20mm |
Starting Method | Short Circuit |
Output current | 10 A – 40 A |
Duty cycle at 40 deg ambient temperature | |
40 % | 40 A |
Mains voltage (tolerances) | 1 x 110 V – 230 V (± 15% ) |
Mains frequency | 50/60 Hz |
Mains fuse (slow-blow) | 20 A |
Max. connected load | 3.4 kVA |
Recommended generator rating | 5.0 kVA |
Dimensions (L x W x H mm) | 430 x 170 x 300mm |
Weight approx. | 12.6 kg |
Product Information
Parweld XTP 40 Plasma | Technical Data |
Mains Voltage | 110 V – 230 V |
Production Cut Capacity | 12mm |
Severance Cut Capacity | 20mm |
Starting Method | Short Circuit |
Output current | 10 A – 40 A |
Duty cycle at 40 deg ambient temperature | |
40 % | 40 A |
Mains voltage (tolerances) | 1 x 110 V – 230 V (± 15% ) |
Mains frequency | 50/60 Hz |
Mains fuse (slow-blow) | 20 A |
Max. connected load | 3.4 kVA |
Recommended generator rating | 5.0 kVA |
Dimensions (L x W x H mm) | 430 x 170 x 300mm |
Weight approx. | 12.6 kg |