Gas Torches
Filter
Showing 1–12 of 15 results
-
18/90 NM250 Gas Cutting Torch
€61.13 Add to cart18/90 NM250 Gas Cutting Torch
The NM250 is a solid and durable cutting torch which when fitted with the appropriate nozzle is suitable for use with either oxy/acetylene or oxy/propane.
Gas type: Oxygen & Acetylene or propane.
Length 18″ (455mm)
Head angle: 90°
Cutting capacity: (steel): up to 12″ (300mm)
Inlet connection: 3/8″ BSP€61.13 -
27/75 NM400 Gas Cutting Torch
€119.69 Read more27/75 NM400 Gas Cutting Torch
The NM400 is a solid and durable cutting torch which when fitted with the appropriate nozzle is suitable for use with either oxy/acetylene or oxy/propane.
Gas type: Oxygen & Acetylene or propane.
Length 27″ (685mm)
Head angle: 75°
Cutting capacity: (steel): up to 15″ (400mm)
Inlet connection: 3/8″ BSP€119.69 -
270mm Propane Super Heating Neck
€24.92 Add to cart270mm Propane Super Heating Neck
A 270mm stainless steel bent heating neck to fit Type 5 propane heating mixer and a propane super heating nozzle.
The neck screws onto the propane mixer with a propane heating nozzle being fitted to the other side.
€24.92 -
36/75 Gas Cutting Torch
€163.41 Add to cart36/75 Gas Cutting Torch
The NM500 is a solid and durable cutting torch which when fitted with the appropriate nozzle is suitable for use with either oxy/acetylene or oxy/propane.
Gas type: Oxygen & Acetylene or propane.
Length 36″ (915mm)
Head angle: 75°
Cutting capacity: (steel): up to 20″ (500mm)
Inlet connection: 3/8″ BSP€163.41 -
700mm Propane Super Heating Neck
€42.19 Add to cart700mm Propane Super Heating Neck
A 700mm stainless steel bent heating neck to fit Type 5 propane heating mixer and a propane super heating nozzle.
The neck screws onto the propane mixer with a propane heating nozzle being fitted to the other side.
€42.19 -
Circle Cutting Attachment – Large
€78.25 Add to cartCircle Cutting Attachment – Large
A circle cutting attachment for NM cutting torches, this attachment allows for the accurate cutting of circles up to a maximun of 750mm.
It fits onto the nozzle side of the blowpipe, between the head and cutting nozzle.
A standoff roller located next to the head end of the attachment allows easy manoeuvrability of the torch head over the workpiece.
A sliding centre pin on the shaft acts as the central pivot point and sets the radius of the circle to be cut.Markings on the shaft of the attachment show measurements for circle radius.
€78.25 -
Circle Cutting Attachment – Small
€23.76 Add to cartCircle Cutting Attachment – Small
A small circle cutting attachment for NM cutting torches, this attachment allows for the accurate cutting of small diameter circles.
Made of brass, this tool clamps onto the pipes of the torch to provide a pivot point.
A height adjustable pin allows optimal adjustment of the cutting height to reduce blowback. The height adjustment also allows the user to use either PNM, ANM, PNME, or ANME nozzles.
Since the attachment clamps to the pipes of the torch, the longer the NM torch is, the larger the radius of the circle being cut can be.
€23.76 -
Lightweight Cutting Attachment
€60.15 Add to cartLightweight Cutting Attachment
Lightweight cutting attachment for use in combination with a Lightweight shank.
Uses AFN cutting nozzles.
Gas type: Oxygen & Acetylene.
Cuts to 25mm (1″)€60.15 -
Lightweight Welding and Cutting Shank
€56.85 Add to cartLightweight Welding and Cutting Shank
The Lightweight combination shank is highley adapable for general welding, brazing and cutting using oxygen and acetylene.
This is a smaller version of the Type 5 shank which makes it ideal for accessing tight areas
Gas type: Oxygen & Acetylene
Welds mild steel up to 8.0mm (5/16 Inch)
Cut to 25mm (1″)
Inlet connection: 1/4″ BSP€56.85 -
Lightweight Welding Mixer
€18.27 Add to cartLightweight Welding Mixer
Lightweight welding mixer used to attach lightweight swaged welding nozzles to a Lightweight shank and mixes the oxygen with the acetylene before it enters the nozzle to produce a flame.
€18.27 -
Replacment Nozzle Nut
€2.46 Add to cart -
Type 5 Cutting Attachment
€58.57 Add to cartType 5 Cutting Attachment
Type 5 cutting attachment for use in combination with the Type 5 shank.
Uses ANM & PNM cutting nozzles.
Gas type: Oxygen & Acetylene or propane.
Cuts to 150mm (6″) with acetylene and 76mm (3″) with propane€58.57